Black and Decker Workmate: The Best Folding Work Bench Around

Updated on September 28, 2017
wilderness profile image

Dan has been a homeowner for some 40 years and has nearly always done his own repair and improvement tasks. He is a licensed electrician.

A workmate bench being used to hold a long beam as multiple large clamps were placed.  Much better than the floor!
A workmate bench being used to hold a long beam as multiple large clamps were placed. Much better than the floor! | Source

Black and Decker Workmate

The Black and Decker workmate is a marvel of a workbench for home use as well as professional. A folding workbench that is lightweight enough to carry with you and with a built in vise - what could be better?

Black and Decker introduced the workmate many years ago (my own workmate is around 20 years old) and in a demonstration of the longevity of some ideas, is still available today. B&D has expanded the original line to three models now, with varying capabilities and prices, but they are all still the workmate that is loved by so many home improvement enthusiasts.

At its most basic, the workmate is a small workbench with a built in vise. One of the two boards that make up the workbench surface is fixed; the other moves back and forth via two screw handles, giving the vise effect. Pegs are also available separately, although the workmate comes with four of the handy "dogs" that extend the size of the work piece that may be gripped. As a method for clamping materials for drilling or sawing operations it is unparalleled.

The workmate also folds reasonably flat, taking up little room in the workshop or garage, and is light enough to easily carry to a more distant job. All but the most economical model have folding legs that produce two different work heights.

My own Black and Decker workmate is one of the most used tools in the workshop. It is a workbench. It is a sawhorse. It is a bench tool support. It is a wood vise. It is so many different things it is incredible, but what it is not is just another useless tool cluttering the workshop. I would give up almost any other tool before my workmate, and appreciate it so much that a new one was my first gift to my son upon becoming a homeowner himself and he is finding it as useful as I do.

Black and Decker Workmate in Use

Click thumbnail to view full-size
The workmate is grooved to hold small round items such as pipeWorkmate being used as a support for a bench tool.  It's just the right height for most bench tools.Folded legs for a lower work surface.  Perfect for tall work.Workmate complete folded for storage, it can be hung on hooks on the wall.Clamping a large round object with the provided pegs.Securely hold other tools while performing maintenance - this can be an enormous help when working on small tools like this.
The workmate is grooved to hold small round items such as pipe
The workmate is grooved to hold small round items such as pipe | Source
Workmate being used as a support for a bench tool.  It's just the right height for most bench tools.
Workmate being used as a support for a bench tool. It's just the right height for most bench tools. | Source
Folded legs for a lower work surface.  Perfect for tall work.
Folded legs for a lower work surface. Perfect for tall work. | Source
Workmate complete folded for storage, it can be hung on hooks on the wall.
Workmate complete folded for storage, it can be hung on hooks on the wall. | Source
Clamping a large round object with the provided pegs.
Clamping a large round object with the provided pegs. | Source
Securely hold other tools while performing maintenance - this can be an enormous help when working on small tools like this.
Securely hold other tools while performing maintenance - this can be an enormous help when working on small tools like this. | Source

Workmate 125

The Black and Decker WM125 is the smallest and most economical of the workmate line of workbenches. Listed for holding up to 350 pounds, it maintains the vise arrangement that makes the workmate so valuable while still folding for storage.

With a workbench area of 13" X 24" it is still of a reasonable size for most homeowner use, and at only 15 pounds it can be taken anywhere the work is. Complete with 4 swivel pegs for clamping larger objects, the workmate 125 is a good addition for any home workshop. While it won't have all of the abilities of the other two, and won't be as easy to work on, for the homeowner that doesn't need a sawhorse or workbench very often it could be just what they need.

Workmate 225

The Black and Decker workmate 225 is the next step with some very nice additions. Four short legs have been added that allow use with the legs either folded for a lower work bench (holding bench tools, perhaps) or left extended for a higher work surface. A step has also been added for added stability of either or both the user and the workbench.

Slightly larger and heavier (28 pounds) than the workmate 125 it is a great choice for the handy person doing only occasional to more frequent work. Capable of holding 450 pounds and with the dual height feature it is even more useful than the 125 model. The added step feature, while seeming to be of limited value, is greatly appreciated by nearly all users. This is the current equivalent of the workbench I find so much use for.

Workmate 425

The workmate 425 is the top of the line in these workbenches from the Black and Decker workmate line. Listed at the ability to hold 550 pounds it is again a little larger and heavier than the workmate 225 while still retaining the ability to fold flat.

The 425 maintains the vise assembly, but with a new twist; the front jaw will now swivel up to provide a vertical clamping ability. The workmate 425 also comes with an additional block to fill in the empty space with the vise is wide open, giving a larger workbench surface when needed.

The top of the line workmate also keeps the folding legs, dual height and step from the 225 model. The workmate 425 is more than adequate for any homeowner use and is a popular choice among professionals that need a portable workbench. The heavy construction virtually guarantees a long life under demanding conditions and would certainly make a welcome addition to the homeowner tool set.

I think that, were I to purchase one today, this would be my choice of the three. The cost is not much more than the 225 model, and that folding surface could have many uses.

Questions & Answers

    © 2010 Dan Harmon

    Comments

      0 of 8192 characters used
      Post Comment

      • wilderness profile image
        Author

        Dan Harmon 3 years ago from Boise, Idaho

        It never stops, does it? I used mine yesterday, fabricating a mount for a TV and BluRay player in an RV. Always another use for them.

      • woodworker10 profile image

        Ron White 3 years ago from USA

        I won one of these in a raffle one time and the first thought that went through my mind is "what am I going to do with this". Needless to say I just keep coming up with new ways.

      • John Holden profile image

        John Holden 4 years ago

        In the late 1970s when I purchased my first Workmate and proudly took it on site I was so ridiculed that I took it home the very same day.

        A decade later you weren't considered a serious chippy if you didn't own a Workmate!

      • Judi Bee profile image

        Judith Hancock 5 years ago from UK

        We bought one for my Dad well over 30 years ago - it was shipped over to the US when we emigrated and I bet he still has it in his workshop.

      • GoodLady profile image

        Penelope Hart 5 years ago from Rome, Italy

        It does seem to be quite affordable. I always imagine this sort of implement will cost a fortune! Nice one.