If you're going through 2x4's into 2x2's, and you don't want big nail heads or to use screws, I'd go with a finishing nailer, and use fairly long nails (3", 16-18 ga.).
What is the best nailer for hardieplank ?
I'm getting ready to install quite a bit of exterior wood trim around windows and doors. I don't want a nail with a head; I want an exterior finish nail. What kind of nailer should I get?
I am trying to replace a plug fuse in my electric panel. I have been using "P" type 20 amp fuses. Now all I can find is "TC" type 20 amp fuses. This new kind is referred to as a "Dual Element Fuse" and is apparently designed with a time delay. Am I correct in thinking that the "Type" ("P" vs "TC") doesn't matter, but the "Amps" are what matters? Am I safe to replace the Type P with the Type TC as long as it is the same amount of amps? Thanks very much!
Which type of drill should I use for drilling in a needle bore diameter is o.46 to 0.84..?
What type of compressor should be used for air sander works like auto or wood?
Copyright © 2018 HubPages Inc. and respective owners. Other product and company names shown may be trademarks of their respective owners. HubPages® is a registered Service Mark of HubPages, Inc. HubPages and Hubbers (authors) may earn revenue on this page based on affiliate relationships and advertisements with partners including Amazon, Google, and others.
Copyright © 2018 HubPages Inc. and respective owners.