Which type of drill should I use for drilling in a needle bore diameter is o.46 to 0.84..?


If the holes are very small, and the material is hard e.g. stainless steel, you could try using carbide drill bits. These are readily available from electronics suppliers and normally used for drilling pass-through holes in PCBs which are made from glass-reinforced epoxy. Cobalt bits are also available from these suppliers with diameters down to 0.15mm.

Updated on January 12, 2018

Original Article:

Choosing the Right Drill Bit for Metal, Wood, Tiles, Glass, or Masonry
By Eugene Brennan